-
Rubber is a high molecular weight polymer. Through plasticization and mixing, rubber has become short chain small molecules, which can be made into various semi-finished products.
Release time:2024-01-20 Click count:1101
-
The foaming agent exhibits agglomeration phenomenon. The solution is to sieve the agglomerated particles, thoroughly powder the coarser particles, and then mix them thoroughly to evenly disperse them.
Release time:2024-01-20 Click count:1094
-
The principle of rubber vulcanization and the advantages of microwave rubber vulcanization. Raw rubber becomes soft when heated, becomes hard and brittle when cooled, is not easy to form, is prone to wear and tear, is easily soluble in organic solvents such as gasoline, has double bonds in the molecules, is prone to addition reactions, and is prone to aging.
Release time:2024-01-20 Click count:1213
-
When producing rubber sponges, the rubber material is usually first molded or extruded into sheet, strip or other shaped sponge materials, and then cut into the required products. There are currently three main processing methods: atmospheric molding, high-pressure molding, and continuous extrusion.
Release time:2024-01-20 Click count:1172
6
1 pages in total
4 pieces of data